Aluminum alloy special high temperature release agent | high efficiency release, prolong mold life, environmental protection formula
Core advantage
✅ Efficient release:
Nanoscale film forming technology can reduce the adhesion between aluminum alloy and mold, and increase the demoulding efficiency by 40%. It is suitable for die casting, gravity casting, extrusion molding and other processes.
High temperature resistance (300℃-800℃), avoid high temperature carbonization residue, protect the surface finish of the mold.
✅ Environmental Safety:
Water-based formula, no silicone, no volatile organic compounds (VOC-Free), in line with EU REACH regulations and RoHS directive.
Passed SGS certification, no heavy metal residues, to ensure the safety of workers and clean production environment.
✅ Economic and durable:
1:50-1:100 high dilution ratio, single use cost is reduced by 30%, covering an area of 10-15㎡/L (depending on process requirements).
Prolong the service life of the mold by more than 2 times, reduce the frequency of downtime and maintenance.
Application scenario
Automotive parts casting (engine cylinder block, wheel hub)
3C electronic products aluminum alloy shell die casting
Extrusion of industrial aluminum profiles
Instructions for use (step-by-step guide)
Step 1 Pretreat
Clean the surface of the mold to ensure that there is no oil, rust and residual release agent (it is recommended to use a special cleaning agent for the mold).
2. Dilution and spraying
Dilution ratio: 1:50 to 1:100 (adjusted according to process requirements, the first use of 1:80 recommended).
Spraying method:
The low pressure spray gun (0.3-0.5MPa) is uniformly sprayed, and the film thickness is controlled at 2-5μm.
Complex molds can be wiped with a dust-free cloth to ensure that dead corners are covered.
3. Drying and forming
Self-drying for 30 seconds at room temperature, or baking for 10-15 seconds below 80℃ to accelerate curing.
Aluminum alloy pouring/die casting according to normal process.
4. Release and maintenance
There is no need for secondary cleaning after demoulding, check the surface of the mold regularly, and spray 1-2 times per shift.
✅ 20 years of metal surface treatment expert: focus on aluminum alloy/magnesium alloy release agent research and development, serving 500+ manufacturing enterprises around the world.
✅ Technical certification:
ISO 9001 Quality management system certification
IATF 16949 production standard for the automotive industry
Own R & D laboratory, 15 patented technologies (including nano dispersion technology, high temperature stabilizer formula)
✅ Production capacity guarantee:
Fully automated production line, monthly production capacity of 2000 tons, support customized formula and OEM.
48 hours fast delivery, covering North America, Europe, Southeast Asia markets.
Customers: Tesla, Huawei, Bosch and other supply chain partners (Logo wall can be added).
Say goodbye to mold loss, low release efficiency, environmental compliance -- Delta aluminum alloy release agent, efficient release, extend mold life, environmental compliance in one step!
